行業動態

當前位置:網站首頁 >> 新聞資訊 >> 行業動態 >> 查看詳情

行業動態

壓縮空氣干燥器-超乎你的想象

來源:杭州優聯超濾設備有限公司  日期:2019-08-31 07:32:17  點擊:450  屬于:行業動態
壓縮空氣干燥器緊縮的空氣中過多的水,無論是液體或蒸氣階段,干燥器配件,雙塔空氣干燥器,單塔空氣干燥器可能會給用戶操作帶來的各式各樣的問題。運用冷凍原理制成的緊縮氣體除水凈化設備,來自管網上游含有大量飽和水汽的緊縮氣體通過冷卻處置后,絕大部分水蒸汽冷凝成液態水滴,經氣水分離后被除掉,所獲的枯燥緊縮氣體可以滿意絕大部分工業的需要與吸附式枯燥機不同的冷凍式枯燥機在除水過程中,能趁便除掉緊縮氣體中的一部分油霧。對緊縮氣體的前置預處置要求沒吸附式枯燥機那樣嚴格。
壓縮空氣干燥器緊縮的空氣中過多的水,無論是液體或蒸氣階段,干燥器配件,雙塔空氣干燥器,單塔空氣干燥器可能會給用戶操作帶來的各式各樣的問題。運用冷凍原理制成的緊縮氣體除水凈化設備,來自管網上游含有大量飽和水汽的緊縮氣體通過冷卻處置后,絕大部分水蒸汽冷凝成液態水滴,經氣水分離后被除掉,所獲的枯燥緊縮氣體可以滿意絕大部分工業的需要與吸附式枯燥機不同的冷凍式枯燥機在除水過程中,能趁便除掉緊縮氣體中的一部分油霧。對緊縮氣體的前置預處置要求沒吸附式枯燥機那樣嚴格。
 
Compressed air dryer compressed air excessive water in the air, whether liquid or vapor stage, dryer accessories, double tower air dryer, single tower air dryer may bring various problems to the user's operation. The compressed gas dewatering and purifying equipment based on refrigeration principle, which contains a large amount of saturated water vapor from the upstream of the pipeline network, condenses most of the water vapor into liquid water droplets after cooling treatment, and is removed after gas-water separation. The dry compressed gas obtained can satisfy the needs of most industries and the adsorption dryness. In the dewatering process, different freezing dryers can remove part of the oil mist in the compressed gas. The requirement of pre-disposal of compressed gas is not as strict as that of adsorption dryer.
 
包括凍結室外空氣管路,加快設備腐蝕速度和形成產品污染。緊縮空氣枯燥器有各式各樣的類型,功能特征通常是由露點來界說的通過"壓力改變"變壓吸附原理)來到達枯燥作用。因為氣體容納水汽的才干與壓力成正比,其枯燥后的一部分氣體(稱為再生氣)減壓脹大至大氣壓,這種壓力改變使脹大氣體變得更枯燥,然后讓它流過需再生的枯燥劑層(選用顆粒活性碳吸附)即已吸收足夠水汽的枯燥塔)枯燥的再生氣吸出枯燥劑里的水份。
 
It includes freezing outdoor air pipeline, accelerating equipment corrosion speed and forming product pollution. There are various types of compressed air dryer. Its functional characteristics are usually defined by dew point, and the drying effect is achieved through the principle of pressure swing adsorption (PSA). Because the ability of the gas to hold water vapor is proportional to the pressure, a part of the dry gas (called regenerated gas) is decompressed and expands to the high pressure. This pressure change makes the expanding body more boring, and then it flows through the drying agent layer that needs regeneration (using particulate activated carbon adsorption), that is, the drying tower that has absorbed enough water vapor). Dry regeneration gas sucks out the water in the drying agent.
福彩3d跨度